The Seven Steps
Vending Machines
Purpose
To secure vending machines.
Recommendation
Use angle brackets and pronged zee clips.
Caution
When anchoring to post-tensioned slab, locate and avoid reinforcing.
Caution
When anchoring to post-tensioned slab, locate and avoid reinforcing.
Supplies Required
- Angle bracket—4″ x 2″ x 1/8″
- Lag bolts—3/8″ diameter (for wood)
- Expansion bolts—1/2″ diameter x 4″ (for concrete)
- Metal screws—No. 14
- Pronged zee clip
Wall Anchorage
Source: Noson, Perbix, SSD
Installation
Angle Bracket Installation
Contact vending service company to install angle brackets.
Contact vending service company to install angle brackets.
- Secure angle bracket to wall with a lag bolt for wood.
OR
Secure to wall with an expansion bolt for concrete. - Attach bracket to the vending machine with metal screws.
Pronged Zee Clip Installation
Align the clip with the leg of the vending machine.
Note
- Locate vending machines away from exits and hallways if possible.
- Enclose vending machine in confined space (if possible) to prevent the machine(s) from tipping over. Do not locate machine so as to impede servicing.
Floor Anchorage
Source: Noson, Perbix, SSD
